FreeEdge Banding Calculator
Tick the edges you will band on each part and get the total length of edge banding, with an allowance for trimming and the number of rolls to buy.
Sheet
Parts 7 pieces
| # | Name | Length | Width | Qty | Edges to band | Remove |
|---|---|---|---|---|---|---|
| A1 | ||||||
| A2 | ||||||
| A3 | ||||||
| A4 | ||||||
| A5 |
- Sheets
- 1
- Edge banding
- 6.3 m
- With 10% extra
- 6.9 m
- 50 m rolls
- 1
| Part | Qty | Edges | Band |
|---|---|---|---|
| Side | 2 | 1.4 m | |
| Bottom | 1 | 0.6 m | |
| Top rail | 2 | 1.1 m | |
| Shelf | 1 | 0.6 m | |
| Door | 1 | 2.6 m |
- Enter your parts with their quantities.
- Tick the edges to band: front, back, ends.
- Read the total length and the rolls needed.
How much edge banding to buy
Add up the length of every banded edge, then add about 10% for the overhang you trim at each end and for mistakes. Edge band is sold in rolls, commonly 50, 100 or 200 m (or 25 and 250 ft), in widths of 19–23 mm for 18 mm board.
Start from a furniture plan instead
All plans →Do not want to work out every part? Pick a design, type its size and get the cut list.
Frequently asked questions
Which edges should I band?
Every edge you can see or touch: shelf fronts, the front edges of sides, and all four edges of doors and drawer fronts.
What width of edge band for 18 mm board?
22 mm, trimmed flush after gluing.